|
|
Our video overlay products can be used in a wide variety of systems and no one power
supply solution would be suitable for them all. Therefore none of our products includes a power supply. You may
already have a suitable power supply or you may wish to source this requirement locally. Otherwise please select
a power supply solution from those shown below. These items are not available separately. |
|
|
|
| 500mA Regulated plug in power supply |
| Standard UK 3 pin plug-in power supply suitable for powering any of our video
overlay units from mains power. This item is not available to customers outside the UK. |
 |
Supply voltage 230V. Maximum current output 500mA |
 |
Multiple voltage output 3/4.5/6/7.5/9/12V 2% stability |
 |
Automatic thermal and overload cut off |
 |
Dimensions LxWxH 92x85x63mm |
 |
Multiple power plugs for alternate applications |
|
|
|
|
| Vehicle 2A DC/DC converter |
| A compact vehicle DC/DC converter which plugs directly into car or lorry
cigar lighters with a standard plug. |
 |
Voltage input min: 12V DC max: 24V DC 2A current rating |
 |
Multiple voltage output 1.5/3/4.5/6/7.5/9/12V |
 |
Fully regulated output |
 |
Automatic thermal and overload cut off |
 |
Multiple power plugs for alternate applications |
|
|
|
|
| 8x AA battery holder with PP3 connector |
| A battery holder which takes 8 standard size AA batteries to give an output
of 12V using alkaline batteries, or 9.6V using Ni-Cd / Ni-MH rechargeables. The cells are securely held in the
holder by this design making it suitable for use with our overlay units when they are used in mobile applications. |
|
|
|
|
| 10x AA battery holder with PP3 connector |
| A battery holder which takes 10 standard size AA batteries to give an output
of 15V using alkaline batteries, or 12V using NiCd / Ni-MH rechargeables. When used with Ni-MH rechargeables it
is suitable for powering any of our overlay units in conjunction with a helmet camera requiring 12V power. |
|
|
|
|
| PP3 - 2.1mm power connector. |
| Robust PP3 battery clip to male 2.1mm power connector cable for connecting
the video overlay units to a battery holder. |
|
|
| |
|
|
| 8 1.2V Ni-MH AA Rechargeable Batteries |
| Set of 8 2700mAh 1.2V Ni-MH rechargeable batteries manufactured by Uniross.
No memory effect, recharge up to 1000 times. |
|
|
|
|
| 10 1.2V Ni-MH AA Rechargeable Batteries |
| Set of 10 2700mAh 1.2V Ni-MH rechargeable batteries manufactured by Uniross.
No memory effect, recharge up to 1000 times. |
|
|
|
|
|
© The BlackBoxCameraTM Company Limited
2008
|